Product Center
Product Center
EGZ Dual-Shaft Paddle Mixer
category:
Paddle Mixer
- 产品描述
- parameter
-
- Commodity name: EGZ Dual-Shaft Paddle Mixer
- Commodity ID: 1019651853555425280
Product summary: Non-gravity dual-shaft paddle mixer features fierce, high efficiency, short mix time. Two agitating axes reversely rotate at the same speed within horizontal cylinder.
General Intruduction
Non-gravity dual-shaft paddle mixer features fierce, high efficiency, short mix time ( 1 to 3 minutes) and more than 95% of eveness for 1:1000 proportion. Two agitating axes reversely rotate at the same speed within horizontal cylinder. The special angle laid on the axis ensures material can cast to three directions including radial, loop and axial, forming a compound circle to achieve uniform mixing in the short time.
Features
1. Mixing Effect
Despite the materials are different in proportion and diameter, it can achieve a good mix effect under the quick and fierce seethe and cast of staggered agitating blades.2. Crash Device
Crushing device is needed when the material agglomerating. “Crushing Stick” with triangle tooth enclosure maintains high rotating speed of over 1400rpm, which smashes and depolymerizes the agglomerating materials in the material weightlessness area.3.Discharging Mode
The materials are usually discharged by pneumatic (manual) flap valve. The arc valve can be embedded tightly into the cylinder and be parallelized with inside cylinder wall without material deposit and mixing dead angle. The standard product can be classified into small door and large door that opens to the side of cylinder, delivering clean and quick material charging and little residue.4.Double Layer Blade
To decrease the replacement costs of easily damaged parts, the paddle blade can be shaped as 2-blade type, on whose base underlaid a movable little blade which can be changed directly, economically and quickly.5.The Gap Between Blade and Cylinder
The gap between paddle blade and cylinder wall directly affects the mix result and the material residue within the mixer after discharging materials; the gap of our products is in range of 3 to 5mm.6.20 Cubic Meters Total Volume
This series mixer can conduct complete volume of 203 m at the most. It is significantly different from the general specification in terms of transmission form of large scale device and the base of mixer.Application
It is widely used in powder cement with high demand for mixing uniformity such as cracking mortar, insulation mortar, binding mortar, plaster mortar, ground level mortar etc. and middle high putty powder, concrete admixtures, feed, chemical powder, food spices and other industries included.
Non-gravity double shafts blade mixer can make the spray operation under 17%, but it is not suitable for the raw material with high viscosity.
Technical Parameters
Model
Total Volume (M³)
Loads Coefficient
Power (KW)
Size(mm)
Max-diameter×Height
Weight
(kg)
EGZ-0.05
0.05
0.4-0.6
1.5
1290×660×837
230
EGZ -0.2
0.2
0.4-0.6
4
1124×1110×720
260
EGZ -0.4
0.4
0.4-0.6
4
1400×1250×1030
450
EGZ -0.5
0.5
0.4-0.6
7.5
1450×1500×950
800
EGZ -1
1
0.4-0.6
11
1800×1800×1350
1150
EGZ -1.5
1.5
0.4-0.6
15
1850×1950×1180
1500
EGZ -2
2
0.4-0.6
18.5
2200×2400×1600
2800
EGZ -2.5
2.5
0.4-0.6
22
2300×2300×1620
4200
EGZ -4
4
0.4-0.6
22
2680×2400×1850
4500
EGZ -5
5
0.4-0.6
37
2950×3050×2040
6000
EGZ -6
6
0.4-0.6
45
3050×3250×2100
7000
EGZ -10
10
0.4-0.6
55
3550×3150×2400
8000
EGZ -12
12
0.4-0.6
55
4695×3180×2500
10500
EGZ -15
15
0.4-0.6
55
4180×3960×2600
10000
EGZ -20
20
0.4-0.6
75
5700×3700×2500
13000
General Intruduction
Non-gravity dual-shaft paddle mixer features fierce, high efficiency, short mix time ( 1 to 3 minutes) and more than 95% of eveness for 1:1000 proportion. Two agitating axes reversely rotate at the same speed within horizontal cylinder. The special angle laid on the axis ensures material can cast to three directions including radial, loop and axial, forming a compound circle to achieve uniform mixing in the short time.
Features
1. Mixing Effect
Despite the materials are different in proportion and diameter, it can achieve a good mix effect under the quick and fierce seethe and cast of staggered agitating blades.2. Crash Device
Crushing device is needed when the material agglomerating. “Crushing Stick” with triangle tooth enclosure maintains high rotating speed of over 1400rpm, which smashes and depolymerizes the agglomerating materials in the material weightlessness area.3.Discharging Mode
The materials are usually discharged by pneumatic (manual) flap valve. The arc valve can be embedded tightly into the cylinder and be parallelized with inside cylinder wall without material deposit and mixing dead angle. The standard product can be classified into small door and large door that opens to the side of cylinder, delivering clean and quick material charging and little residue.4.Double Layer Blade
To decrease the replacement costs of easily damaged parts, the paddle blade can be shaped as 2-blade type, on whose base underlaid a movable little blade which can be changed directly, economically and quickly.5.The Gap Between Blade and Cylinder
The gap between paddle blade and cylinder wall directly affects the mix result and the material residue within the mixer after discharging materials; the gap of our products is in range of 3 to 5mm.6.20 Cubic Meters Total Volume
This series mixer can conduct complete volume of 203 m at the most. It is significantly different from the general specification in terms of transmission form of large scale device and the base of mixer.Application
It is widely used in powder cement with high demand for mixing uniformity such as cracking mortar, insulation mortar, binding mortar, plaster mortar, ground level mortar etc. and middle high putty powder, concrete admixtures, feed, chemical powder, food spices and other industries included.
Non-gravity double shafts blade mixer can make the spray operation under 17%, but it is not suitable for the raw material with high viscosity.
Technical Parameters
Model
Total Volume (M³)
Loads Coefficient
Power (KW)
Size(mm)
Max-diameter×Height
Weight
(kg)
EGZ-0.05
0.05
0.4-0.6
1.5
1290×660×837
230
EGZ -0.2
0.2
0.4-0.6
4
1124×1110×720
260
EGZ -0.4
0.4
0.4-0.6
4
1400×1250×1030
450
EGZ -0.5
0.5
0.4-0.6
7.5
1450×1500×950
800
EGZ -1
1
0.4-0.6
11
1800×1800×1350
1150
EGZ -1.5
1.5
0.4-0.6
15
1850×1950×1180
1500
EGZ -2
2
0.4-0.6
18.5
2200×2400×1600
2800
EGZ -2.5
2.5
0.4-0.6
22
2300×2300×1620
4200
EGZ -4
4
0.4-0.6
22
2680×2400×1850
4500
EGZ -5
5
0.4-0.6
37
2950×3050×2040
6000
EGZ -6
6
0.4-0.6
45
3050×3250×2100
7000
EGZ -10
10
0.4-0.6
55
3550×3150×2400
8000
EGZ -12
12
0.4-0.6
55
4695×3180×2500
10500
EGZ -15
15
0.4-0.6
55
4180×3960×2600
10000
EGZ -20
20
0.4-0.6
75
5700×3700×2500
13000
-
-
parameter
- 1
- 2
- 3
- 4
-
Product Description
General Intruduction
Non-gravity dual-shaft paddle mixer features fierce, high efficiency, short mix time ( 1 to 3 minutes) and more than 95% of eveness for 1:1000 proportion. Two agitating axes reversely rotate at the same speed within horizontal cylinder. The special angle laid on the axis ensures material can cast to three directions including radial, loop and axial, forming a compound circle to achieve uniform mixing in the short time.
Features
1. Mixing Effect
Despite the materials are different in proportion and diameter, it can achieve a good mix effect under the quick and fierce seethe and cast of staggered agitating blades.
2. Crash Device
Crushing device is needed when the material agglomerating. “Crushing Stick” with triangle tooth enclosure maintains high rotating speed of over 1400rpm, which smashes and depolymerizes the agglomerating materials in the material weightlessness area.
3.Discharging Mode
The materials are usually discharged by pneumatic (manual) flap valve. The arc valve can be embedded tightly into the cylinder and be parallelized with inside cylinder wall without material deposit and mixing dead angle. The standard product can be classified into small door and large door that opens to the side of cylinder, delivering clean and quick material charging and little residue.
4.Double Layer Blade
To decrease the replacement costs of easily damaged parts, the paddle blade can be shaped as 2-blade type, on whose base underlaid a movable little blade which can be changed directly, economically and quickly.
5.The Gap Between Blade and Cylinder
The gap between paddle blade and cylinder wall directly affects the mix result and the material residue within the mixer after discharging materials; the gap of our products is in range of 3 to 5mm.
6.20 Cubic Meters Total Volume
This series mixer can conduct complete volume of 203 m at the most. It is significantly different from the general specification in terms of transmission form of large scale device and the base of mixer.
Application
It is widely used in powder cement with high demand for mixing uniformity such as cracking mortar, insulation mortar, binding mortar, plaster mortar, ground level mortar etc. and middle high putty powder, concrete admixtures, feed, chemical powder, food spices and other industries included.
Non-gravity double shafts blade mixer can make the spray operation under 17%, but it is not suitable for the raw material with high viscosity.
Technical Parameters
Model |
Total Volume (M³) |
Loads Coefficient |
Power (KW) |
Size(mm) Max-diameter×Height |
Weight (kg) |
EGZ-0.05 |
0.05 |
0.4-0.6 |
1.5 |
1290×660×837 |
230 |
EGZ -0.2 |
0.2 |
0.4-0.6 |
4 |
1124×1110×720 |
260 |
EGZ -0.4 |
0.4 |
0.4-0.6 |
4 |
1400×1250×1030 |
450 |
EGZ -0.5 |
0.5 |
0.4-0.6 |
7.5 |
1450×1500×950 |
800 |
EGZ -1 |
1 |
0.4-0.6 |
11 |
1800×1800×1350 |
1150 |
EGZ -1.5 |
1.5 |
0.4-0.6 |
15 |
1850×1950×1180 |
1500 |
EGZ -2 |
2 |
0.4-0.6 |
18.5 |
2200×2400×1600 |
2800 |
EGZ -2.5 |
2.5 |
0.4-0.6 |
22 |
2300×2300×1620 |
4200 |
EGZ -4 |
4 |
0.4-0.6 |
22 |
2680×2400×1850 |
4500 |
EGZ -5 |
5 |
0.4-0.6 |
37 |
2950×3050×2040 |
6000 |
EGZ -6 |
6 |
0.4-0.6 |
45 |
3050×3250×2100 |
7000 |
EGZ -10 |
10 |
0.4-0.6 |
55 |
3550×3150×2400 |
8000 |
EGZ -12 |
12 |
0.4-0.6 |
55 |
4695×3180×2500 |
10500 |
EGZ -15 |
15 |
0.4-0.6 |
55 |
4180×3960×2600 |
10000 |
EGZ -20 |
20 |
0.4-0.6 |
75 |
5700×3700×2500 |
13000 |
General Intruduction
Non-gravity dual-shaft paddle mixer features fierce, high efficiency, short mix time ( 1 to 3 minutes) and more than 95% of eveness for 1:1000 proportion. Two agitating axes reversely rotate at the same speed within horizontal cylinder. The special angle laid on the axis ensures material can cast to three directions including radial, loop and axial, forming a compound circle to achieve uniform mixing in the short time.
Features
1. Mixing Effect
Despite the materials are different in proportion and diameter, it can achieve a good mix effect under the quick and fierce seethe and cast of staggered agitating blades.
2. Crash Device
Crushing device is needed when the material agglomerating. “Crushing Stick” with triangle tooth enclosure maintains high rotating speed of over 1400rpm, which smashes and depolymerizes the agglomerating materials in the material weightlessness area.
3.Discharging Mode
The materials are usually discharged by pneumatic (manual) flap valve. The arc valve can be embedded tightly into the cylinder and be parallelized with inside cylinder wall without material deposit and mixing dead angle. The standard product can be classified into small door and large door that opens to the side of cylinder, delivering clean and quick material charging and little residue.
4.Double Layer Blade
To decrease the replacement costs of easily damaged parts, the paddle blade can be shaped as 2-blade type, on whose base underlaid a movable little blade which can be changed directly, economically and quickly.
5.The Gap Between Blade and Cylinder
The gap between paddle blade and cylinder wall directly affects the mix result and the material residue within the mixer after discharging materials; the gap of our products is in range of 3 to 5mm.
6.20 Cubic Meters Total Volume
This series mixer can conduct complete volume of 203 m at the most. It is significantly different from the general specification in terms of transmission form of large scale device and the base of mixer.
Application
It is widely used in powder cement with high demand for mixing uniformity such as cracking mortar, insulation mortar, binding mortar, plaster mortar, ground level mortar etc. and middle high putty powder, concrete admixtures, feed, chemical powder, food spices and other industries included.
Non-gravity double shafts blade mixer can make the spray operation under 17%, but it is not suitable for the raw material with high viscosity.
Technical Parameters
Model |
Total Volume (M³) |
Loads Coefficient |
Power (KW) |
Size(mm) Max-diameter×Height |
Weight (kg) |
EGZ-0.05 |
0.05 |
0.4-0.6 |
1.5 |
1290×660×837 |
230 |
EGZ -0.2 |
0.2 |
0.4-0.6 |
4 |
1124×1110×720 |
260 |
EGZ -0.4 |
0.4 |
0.4-0.6 |
4 |
1400×1250×1030 |
450 |
EGZ -0.5 |
0.5 |
0.4-0.6 |
7.5 |
1450×1500×950 |
800 |
EGZ -1 |
1 |
0.4-0.6 |
11 |
1800×1800×1350 |
1150 |
EGZ -1.5 |
1.5 |
0.4-0.6 |
15 |
1850×1950×1180 |
1500 |
EGZ -2 |
2 |
0.4-0.6 |
18.5 |
2200×2400×1600 |
2800 |
EGZ -2.5 |
2.5 |
0.4-0.6 |
22 |
2300×2300×1620 |
4200 |
EGZ -4 |
4 |
0.4-0.6 |
22 |
2680×2400×1850 |
4500 |
EGZ -5 |
5 |
0.4-0.6 |
37 |
2950×3050×2040 |
6000 |
EGZ -6 |
6 |
0.4-0.6 |
45 |
3050×3250×2100 |
7000 |
EGZ -10 |
10 |
0.4-0.6 |
55 |
3550×3150×2400 |
8000 |
EGZ -12 |
12 |
0.4-0.6 |
55 |
4695×3180×2500 |
10500 |
EGZ -15 |
15 |
0.4-0.6 |
55 |
4180×3960×2600 |
10000 |
EGZ -20 |
20 |
0.4-0.6 |
75 |
5700×3700×2500 |
13000 |
Key words:
previous
next
previous
next
ONLINE MESSAGE
*Note: Please be sure to fill in the information accurately and keep the communication open, we will get in touch with you as soon as possible
Related Products